From SPCTools

Contents 1 Quick Start to data analysis using the TPP 1.1 1. Download and install the TPP 1.1.1 Log into Petunia, the TPP GUI 1.2 2. Download and install the test data and database 1.3 3. Convert raw data to the mzML format 1.4 4. Search data with X!Tandem 1.4.1 Convert results to PepXML 1.5 5. Search data with SpectraST 1.6 6. Validation of Peptide-Spectrum assignments with PeptideProphet 1.7 7. Visualize LC-MS/MS data using Pep3D 1.8 8. Further peptide-level validation iProphet 1.9 9. Peptide Quantitation with ASAPRatio 1.10 10. Protein-level validation with ProteinProphet 2 Other Resources

Quick Start to data analysis using the TPP

1. Download and install the TPP

To install on your Windows system, please follow this link and click on "TPP_Setup_v4_2_JETSTREAM_rev_1.exe". Select "Run" if prompted, and follow the instructions on the wizard. (For a detailed installation guide, please read our Windows Installation Guide.)

Log into Petunia, the TPP GUI

As a way to verify that the installation was successful, log into Petunia by double-clicking on the Trans-Proteomic Pipeline flower icon on your Desktop or through the Start menu. Alternatively, you can open a browser window into the following URL: http://localhost/tpp-bin/tpp_gui.pl . You can use the credentials guest and guest as user name and password to log in.

Once you are in the Home page, please select Tandem as the analysis pipeline, just below the Welcome message.

2. Download and install the test data and database

For this demo, we will be using a SILAC-labeled Yeast dataset, comprised of 2 runs on a high mass-accuracy Orbitrap instrument, along with a Yeast database appended with decoys. We also include a search parameters file.

• Please download the demo data as a zip file from this link RAW parameter file from tandem database from database

• Unzip (unpack) raw files; you should find 2 files.
• Copy or move the yeast_orfs_all_REV.20060126.subset.fasta file into the folder C:\Inetpub\wwwroot\ISB\data\dbase
• Copy or move the two data files (OR20080317_S_SILAC-LH_1-1_01.raw and OR20080317_S_SILAC-LH_1-1_11.raw) as well as the tandem parameters file into the folder C:\Inetpub\wwwroot\ISB\data\demo2009\tandem . Create this last folder if necessary.

3. Convert raw data to the mzML format

We have developed the TPP (and dozens or related tools) to read mass-spec data from a common, open data format. We must therefore first convert the proprietary raw data to this format, called mzML.

You can only do this data conversion step if the TPP is installed on a machine that also contains an installation of Bioworks or Xcalibur, as the converter needs to use vendor software libraries to read the raw data. If your machine does not have either of these, you can download the mzML files from this link (NEED LINK) and skip to the next step.

• Mouse-over the Analysis Pipeline (Tandem) portion of the navigation links near the top of the page; a pop-up menu should appear. Select the mzML item in this menu.
• Click on the Add Files button in the first section; the File Chooser window will open.
• Click on the demo2009 directory link on the right portion of the page. Then select tandem.
• Select both raw data files by clicking on the checkbox next to each, then on the Select button at the bottom. This should return you to the mzML page along with a confirmation of the files that you just selected.
• Leave the Conversion Options unchecked.
• Click on Convert to mzML; a wait page should appear.
• The Command Status box should automatically change color to orange when the conversions are done.

4. Search data with X!Tandem

A custom version of the popular open-source search engine X!Tandem is bundled and installed with the TPP. It has been modified from the original distribution by adding the K-Score scoring function, developed by a team at the Fred Hutchinson Cancer Research Center.

• First, make sure that Tandem is selected as the analysis pipeline.
• Click on the Database Search tab under Analysis Pipeline to access the X!Tandem search interface.
• Click on Add Files and select the two mzML files present in the demo2009\tandem directory as input files for database searching.
• Similarly, choose the Tandem parameters file called tandem.xml located in the same directory.

 This file defines the database search parameters that override the full set of default settings referenced in the file isb_default_input. 
 In this example, the mass tolerance is set to -2.1 Da to 4.1 Da , and the residue modification mass is set to 57.021464@C.
 For more information, please go to TANDEM 

• Lastly, select a sequence database to search against. Navigate up to the dbase directory in the File Chooser, and select the database file yeast_orfs_all_REV.20060126.subset.fasta.
• Start the search by clicking on Run Tandem Search.

Convert results to PepXML

Since each search engine provides results in different ways, the TPP requires that they be converted to a common format for downstream processing. This is the PepXML format, and can the conversion can be effected via the pepXML tab of the Analysis Pipeline.

• Choose the two OR2008*.tandem files in the demo2009\tandem directory; these are the X!Tandem search results.
• Click on Convert to PepXML.

5. Search data with SpectraST

SpectraST is a search engine that compares acquired spectra against a library of pre-identified spectra to which peptide sequences have been assigned. In order to conduct the search, we must first download the appropriate spectral library.

• Go to the Home page, and switch the pipeline type to SpectraST.
• Under the SpectraST Tools section of the navigation menu, select the Download Spectral Libraries menu item.
• You are now at at page that shows a list of spectral libraries available at PeptideAtlas, along with locally-installed/downloaded ones. Select the NIST_yeast_IT_v2.0_2008-07-11.splib.zip (yeast ion trap) library on the right pane, and click on Download Selected Libraries.

We also need the mzML data files we converted in step 4. While this can be accomplished within Petunia, it is easier to use the native Windows file copy. Copy the two mzML files located at C:\Inetpub\wwwroot\ISB\data\demo2009\tandem into the directory C:\Inetpub\wwwroot\ISB\data\demo2009\spectrast. Now we can move on to searching these data:

• Mouse-over the Analysis Pipeline menu title in Petunia, and then click on the SpectraST Search menu item to access the SpectraST search interface.
• In section 1, select the two mzML data files under demo2009\spectrast.
• For section 2, select the NIST_yeast_IT_v2.0_2008-07-11.splib.splib spectral library file located under dbase\speclibs. This is the file you downloaded from PeptideAtlas above.
• Finally, for section 3, select the yeast_orfs_all_REV.20060126.short.fasta sequence database, located under dbase.
• Leave the rest of the options on the page at their default values, and click on Run SpectraST to initiate the search.

6. Validation of Peptide-Spectrum assignments with PeptideProphet

PeptideProphet provides statistical validation of search engine results by assigning a probability to each peptide-spectrum match.

• Click on the Analyze Peptides tab under the Analysis Pipeline section in Petunia to access the xinteract interface.

xinteract is a general utility that is able to launch
several components of the TPP, including PeptideProphet.

• Select the two OR2008*.pep.xml files in the directory demo2009\tandem. Make sure that there are only two files selected for analysis; you can edit the selections using the checkboxes and Remove button on the right-hand side.
• Under PeptideProphet Options, find and select the option to Use accurate mass binning since this is a high-accuracy data.
• Leave all other options set to their defaults, and click on Run XInteract at the bottom of the page to run PeptideProphet.
• Once the command finishes running, you can click on the view results link that appears in the Command Status box to view and analyze the results. IMG:PepProphet On this page, sort the list in descending order based on Probabilities. The identifications at the top of the resulting list are most likely to be correct. Click on the hypertext link for any probability. This brings up a details page IMG:PlotModel which shows the modeled distributions. This link should always be looked at to verify that the analysis worked well.
• You can now go back run this analysis on the SpectraST results. Again, make sure you are only analyzing two input files.

7. Visualize LC-MS/MS data using Pep3D

Pep3D is a tool for visualizing LC MS data, along with results from PeptideProphet.

• Under the Utilities -> Browse Files section in Petunia, navigate to the demo2009\tandem directory. (nB. you may already be in that directory.) You may also select the interact.pep.xml file under the spectrast folder.
• Open the PeptideProphet results file by clicking on the [ PepXML ] link next to the file named interact.pep.xml. This will launch the PepXMLViewer application.
• Click on the Other Actions top-level tab, and then on the Generate Pep3D button. A new window will launch the Pep3D viewer.
• Leave the default options (or change to taste) and click on the Generate Pep3D Image button.
• After a few moments, you should see two images displayed on the page, one per mzML input file. IMG:Pep3D

8. Further peptide-level validation iProphet

iProphet (or InterProphet) is a tool that provides statistical refinement of PeptidePropet results.

• Click on the Combine Analyses tab under the Analysis Pipeline section in Petunia to access the iProphet interface.
• Select the interact.pep.xml file in the directory demo2009\tandem, as well as the file of the same name under the demo2009\spectrast directory. Make sure that there are two files selected for analysis; you can edit the selections using the checkboxes and Remove button on the right-hand side.
• Under Output File and Location, make sure that the File path (folder) is set to c:/Inetpub/wwwroot/ISB/data/demo2009. You may have to edit out part of the default value that is first shown.

• Leave all other options set to their defaults, and click on Run InterProphet at the bottom of the page to run iProphet.
• Once the command finishes running, you can click on the view results link that appears in the Command Status box to view and analyze the results. IMG:iprophet

9. Peptide Quantitation with ASAPRatio

ASAPRatio is a tool for measuring relative expression levels of peptides and proteins from isotopically-labeled samples (e.g. ICAT, SILAC, etc).

• Click on the Analyze Peptides tab under the Analysis Pipeline section in Petunia to access the xinteract interface again.
• Select the interact.iproph.pep.xml file in the directory demo2009. Make sure that there is only one file selected for analysis; you can edit the selections using the checkboxes and Remove button on the right-hand side.
• Important: Make sure that you uncheck the option to RUN PeptideProphet under PeptideProphet Options, as this file already contains results from PeptideProphet.
• Under ASAPRatio Options, select to RUN ASAPRatio, change Labeled Residues to K and R, set m/z range to include in summation of peak to 0.05, set Specified masses to M 147.035, K 136.10916, and R 166.10941.

• Leave all other options set to their defaults, and click on Run XInteract at the bottom of the page to run ASAPRatio.
• Once the command finishes running, you can click on the view results link that appears in the Command Status box to view and analyze the results. The “asapratio” column contains quantitation results with a link to the ASAPRatio ion trace. The number listed in the “asapratio” column is the light to heavy ratio. IMG:ASAPRatioProfiles

10. Protein-level validation with ProteinProphet

ProteinProphet is a tool that provides statistical validation of Protein identifications, and is based on PeptideProphet results.

• Click on the Analyze Proteins tab under the Analysis Pipeline section in Petunia to access the ProteinProphet interface.
• Select the interact.pep.xml file in the directory demo2009. Make sure that there is only one file selected for analysis; you can edit the selections using the checkboxes and Remove button on the right-hand side.
• Leave all other options set to their defaults, and click on Run ProteinProphet at the bottom of the page to run ProteinProphet.

• once the command finishes running, you can click on the view results link that appears in the Command Status box to view and analyze the results. Protein groups are sorted in descending order by Probability so that the groups at the top of the page are the most confident identifications. The protein probabilities are the red numbers listed next to each protein group. IMG:Protxml

Other Resources

• You can find a longer, more thorough tutorial at the TPP Tutorial page of our Wiki.