Building Peptide Atlas

From SPCTools

(Difference between revisions)

Revision as of 18:12, 13 March 2009

Here is how I built a human urine PeptideAtlas in December 2008.

1 Start with one or more PeptideProphet output files (pepXML) for each experiment in each project.
2 Copy build recipe and follow it
3 Register projects and experiments using SBEAMS interface.
4 Run iProphet and ProteinProphet
- 4.1 If you ran multiple search engines for each experiment, combine per experiment using iProphet.
- 4.2 Combine all pepXML files for project using iProphet, then run ProteinProphet
5 Obtain search batch IDs for each experiment.
6 Run PeptideAtlas build "pipeline".
7 Load the reference DB (biosequence set) if new one is needed
8 Define Atlas build via SBEAMS
9 Load data into build

Start with one or more PeptideProphet output files (pepXML) for each experiment in each project.

A project is a set of related experiments. For example, a project may study proteins found in normal and diseased liver, and may include 4 experiments: tissue from two normal patients and from two diseased patients. The pepXML files should be created by searching the spectra with a database search engine such as SEQUEST, X!Tandem, or SpectraST, then validating the hits using PeptideProphet. If you are going to combine search results using iProphet (see below), iProphet should not be run on each set of search results individually; to avoid running iProphet you will need to run xinteract manually because scripts such as runtandemsearch automatically run iProphet after PeptideProphet.

Searching databases containing decoys is recommended to provide a reference point for evaluating the FDR (false discovery rate) of the final Atlas. As of fall 2008, spectral libraries containing decoys are available for SpectraST searching.

It is helpful when referencing files using wildcards if the pepXML files all reside at the same level in the directory tree. If you have to move files to achieve this, adjust the paths within them using

$ /sbeams/bin/updateAllPaths.pl *.xml *.xls *.shtml.

Copy build recipe and follow it

The unix commands needed to do each step below are given in mimas.systemsbiology.net:/net/db/projects/PeptideAtlas/pipeline/recipes/master_recipe.notes. Copy this file to <your_build>_recipe.notes, follow along, and edit as needed for your build. Most stuff takes place via mimas (a.k.a. db) at /net/db/projects/PeptideAtlas.

Register projects and experiments using SBEAMS interface.

Go to db.systemsbiology.net.
Login to SBEAMS.
Click tab "My Projects" or "Accessible Projects" and click "Add new project" at bottom.
Fill out fields. Owner of project should be the experimenter who created the data. Project tag should match name of subdirectory in /sbeams/archive/<project_owner> that contains the data.
To register experiments, go to SBEAMS Home > Proteomics > Manage Data > Experiments

Run iProphet and ProteinProphet

If you ran multiple search engines for each experiment, combine per experiment using iProphet.

Create a directory, parallel to the search results directories, named iProphet. Then, for example,

$ iProphet ../{XTK,SPC,SEQ}*/interact-prob.pep.xml interact-combined.pep.xml

Be sure that the input pepXML files were not already processed by iProphet -- you don't want to run iProphet twice. Caution: if you ran an automated post-processing script such as runtandemsearch (which calls finishtandemsearch), iProphet may already have been run automatically. Conversely, if you are using only one search engine and did not run iProphet immediately after running ProteinProphet, run it now.

The resulting pepXML files will be used to generate final peptide probabilities in the "gather all peptides" step of the Atlas build process below.

Combine all pepXML files for project using iProphet, then run ProteinProphet

First create a directory for your project in your data area, for ample disk space. Run on regis9 for ample memory.

$ ssh regis9
$ cd /regis/data3/tfarrah/search
$ mkdir HsUrine; cd HsUrine; mkdir MultipleExps; cd MultipleExps; mkdir iProphet; cd iProphet
$ iProphet /regis/sbeams/archive/{phaller,youngah}/*Urine*/*/{XTK,SPC,SEQ}*/interact-prob.pep.xml
$ ProteinProphet interact-combined.pep.xml interact-combined.prot.xml UNMAPPED NORMPROTLEN PROTLEN MININDEP0.2 IPROPHET > & ProteinProphet.out

Combining all pepXML files may not be feasible with many and/or large files. In that case, you will need to run iProphet on the experiments in batches, then run ProteinProphet on all the resulting pepXML files combined. Consult David S. for advice.

The purpose of the ProteinProphet run is to adjust the probabilities of all the peptides according to NSP (number of sibling peptides). The adjusted probabilities are not used directly, but are used to generate a multiplicative factor for each peptide which is then applied to the iProphet probability for each observation of that peptide. In particular, it is important to note that, as of January 2009, ProteinProphet protein probabilities are not displayed or used in any way in the PeptideAtlas. This is because these probabilities are, for large datasets, overly optimistic.

Obtain search batch IDs for each experiment.

Run PeptideAtlas build "pipeline".

Scripts can be found in /net/db/projects/PeptideAtlas/pipeline/run_scripts. Each script ultimately calls /net/db/projects/PeptideAtlas/pipeline/run_scripts/run_Master_current.csh, and this is where the meat of the pipeline resides.

Gather peptides and update probabilities

Step01. Looks at the results of the TPP, adjusts pepXML probabilities based on protXML info, gathers all PSMs (peptide-spectrum matches) that are wanted for this build based on a probability or FDR threshold, and stores all relevant info for each in a combined PA identlist file. Calls createPipelineInput.pl, via pipeline/bin/PeptideFilesGenerator.pm. Creates identlist template file and identlist file for each pepXML in Experiments.list, then the combined file. The identlist template file contains only the unadjusted pepXML info for PSMs with P>=0.4; it is cached in the same dir as each pepXML file to speed future builds.

At the core of this step is the script createPipelineInput.pl.

Files created in build directory, all but last created by createPipelineInput.pl:

PeptideAtlasInput_concat.PAidentlist
PeptideAtlasInput_sorted.PAidentlist
These two files are identical except for the sorting of the lines. They are in tsv format and have the following fields:

search batch ID
spectrum query
Peptide Atlas accession
peptide sequence
preceding residue
modified peptide sequence (includes modification & charge info)
following residue
charge
peptide probability
massdiff
protein name
nsp adjusted probability from protXML
n_adj_obs from protXML
n_sibling_peps from protXML

APD_Sc_all.tsv
APD_Sc_all.PAxml
APD_Sc_all.fasta -- fasta format file of all peptides in our atlas; PeptideAtlas accessions used. (Created in pipeline script after call to createPipelineInput.pl)

Files created in the directory for each experiment:

interact-prob.pep.PAidentlist-template -- first 11 fields of PAidentlist files above
interact-prob.pep.PAidentlist -- same format as PAidentlist files above

Download latest fasta files from web for reference DB (also called biosequence set)

Step02. Calls pipeline script with --getEnsembl and executes getEnsembl(). Gets Ensembl fasta file via FTP unless stored locally. Merges in any supplemental protein file specified by calling $PIPELINE/bin/mergeEnsembleAndIPI.pl. Files created:

<species>.pep.fa -- Ensembl file as retrieved via FTP.
<species>.fasta -- Ensembl plus supplemental sequences. This is the file that is stored as a Biosequence Set in PeptideAtlas.

Seems to me that this step can be skipped if we are using a reference DB / biosequence set that already exists in SBEAMS -- often the case. Also seems that this step, like the SpectraST library building step, is independent of all the others.

Map peptides to reference DB

Step03. Finds all possible matches for each peptide in reference DB and get start and end coordinates of aligned region. Calls pipeline script with --BLASTP. Script then calls matchPeptides(), which does a system call of $PIPELINE/bin/PeptidePositionLocator.pl, which seems to search the DB without calling blast and, at end, prints "N peptides with/without a match". Files created:

peptide_mapping.tsv -- for each peptide, one line per reference DB hit, or a single truncated line if no hit
- PA accession
- pep seq
- protein identifier
- start of aligned region
- end of aligned region

Apparently the BLAST program used to be used, but is no longer used.

Count mapped peptides; print in different format

Step04. Calls pipeline script with --BLASTParse. Script then calls BLAST_APD_ENSEMBL(). Reads peptide_mapping.tsv, counts the number of entries for each peptide, and prints out another file with the same number of lines. Counts the number of unique peptide accessions with hits in the ref DB and reports as "hits" and "perfect hits" (identical as of March 2009). File created:

APD_ensembl_hits.tsv -- for each peptide, one line per reference DB hit:
- PA peptide accession
- peptide length
- protein sequence ID
- peptide length
- 100
- start position
- end position
- 0

This file omits those peptide accessions that don't have hits in the reference DB, so it will have the same or smaller number of lines as peptide_mapping.tsv. The filename is misleading, as it contains hits to the entire ref DB, not just Ensembl.

Calculate chromosomal coordinates

Step05. Again reads peptide_mapping.tsv, looks up chromosomal coordinates for each entry, and prints into a new file. Calls pipeline script with --BLASTParse --getCoordinates. Calls BLAST_APD_ENSEMBL() again, which reads any previous coordinate cache file (.enscache). Files created:

coordinate_mapping.txt: lines have same format as peptide_mapping.tsv, plus:
- gene ID
- strand
- start
- end
- transcript stable ID
- gene stable ID

If not an Ensembl mapping, then these fields are filled with zero or UNKNOWN.

$PIPELINE/new_cache/$dbname.enscache -- this file has one token per line. Data is organized into six line chunks:
- gene ID
- strand
- gene ID
- chromosome
- start
- end

As of March 2009 I see such cache files for only 4 species: human, mouse, yeast, and drosophila, and they are all dated 2004-2007.

Make a list of unmappable peptides

Step06. Calls pipeline script with --lostAndFound. Files needed:

APD_<organism>_all.fasta (peptides for our atlas)
APD_ensembl_hits.tsv (mapping)

Files created:

APD_ensembl_lost_queries.dat -- a list of PA peptide accessions that are not mappable.

Compile statistics on the peptides and proteins in the build

Step07. Calls the following:

/regis/sbeams/bin/Mayu/Mayu.pl
$PIPELINE/bin/fasta_stat.pl
$PIPELINE/bin/peptide_stats_from_step04.pl
$SBEAMS/lib/scripts/PeptideAtlas/calcProteinStatistics.pl
$SBEAMS/lib/scripts/PeptideAtlas/statistics/calcPeptideListStatistics.pl
$SBEAMS/bin/protein_chance_hits.pl

Files created in analysis directory:

Mayu_out.csv -- table of FDRs at spectrum, peptide, and protein levels
prophet_model.sts
search_dir_stats.txt
analysis.out -- a summary of the results, plus instructions to do the following manually:
- creating an experiment contribution plot. A plot for the web Atlas is generated automatically, but these instructions tell you how to create a better one.
- creating an amino acid abundance plot. Untested by Terry.

Files created in DATA_FILES directory:

protein2gene.txt
duplicate_groups.txt -- each line lists a primary identifier from the ref DB, then one or more non-primary identifiers. Has header line.
duplicate_mapping.txt -- created from duplicate_groups.txt. Each line lists a non-primary, primary identifier pair. Has header line.
duplicate_entries.txt -- non-primary identifiers
out.2tonsequences -- some short list of peptide sequences
PPvsDECOY.dat -- brief stats on number of decoys found in 3 probability ranges
experiment_contribution_summary.out -- table used for PeptideAtlas summary page
protein_chance_hits.out
simplereducedproteins.txt -- a rather minimal list of proteins in sample
msruncounts.txt -- number of MS runs per experiment

Build a SpectraST library from the build

Step08. Does not depend on any previous steps and can be executed at any point in the pipeline. Files created:

<build-name>_all.splib
<build-name>_all.sptxt

Load the reference DB (biosequence set) if new one is needed

Define Atlas build via SBEAMS

Load data into build

Commands below entered on command line on mimas. Full usage including desired options found in recipe.

Load data

$SBEAMS/lib/scripts/PeptideAtlas/load_atlas_build.pl. January 22, 2009: using --purge and --load options together seems to reload previous build. Instead, call first with --purge, then again with --load.

Build search key

$SBEAMS/lib/scripts/PeptideAtlas/rebuildKeySearch.pl

Update empirical proteotypic scores

$SBEAMS/lib/scripts/PeptideAtlas/updateProteotypicScores.pl

Load spectra and spectrum IDs

Update statistics

Retrieved from "http://tools.proteomecenter.org/wiki/index.php?title=Building_Peptide_Atlas"

 ===Run PeptideAtlas build "pipeline".===
 Scripts can be found in /net/db/projects/PeptideAtlas/pipeline/run_scripts. Each script ultimately calls /net/db/projects/PeptideAtlas/pipeline/run_scripts/run_Master_current.csh, and this is where the meat of the pipeline resides.
-====Gather all peptides and update probabilities====
+====Gather peptides and update probabilities====
-Step01. Calls createPipelineInput.pl, via pipeline/bin/PeptideFilesGenerator.pm. Creates "identlist file" for each pepXML in Experiments.list, and also a combined file. This is a simple text format (one line per record) file containing all the relevant pepXML and protXML info for each peptide identification with P>=threshold (usually 0.9), with peptide probabilities adjusted using the protXML probabilities as a guide.  An identlist ''template'' file is also created which contains only the unadjusted pepXML info for peptides with P>=(threshold-0.4); it is cached in the same dir as each pepXML file for use in future builds.
+Step01. Looks at the results of the TPP, adjusts pepXML probabilities based on protXML info, gathers all PSMs (peptide-spectrum matches) that are wanted for this build based on a probability or FDR threshold, and stores all relevant info for each in a combined PA identlist file. Calls createPipelineInput.pl, via pipeline/bin/PeptideFilesGenerator.pm. Creates identlist template file and identlist file for each pepXML in Experiments.list, then the combined file. The identlist template file contains only the unadjusted pepXML info for PSMs with P>=0.4; it is cached in the same dir as each pepXML file to speed future builds.
 At the core of this step is the script createPipelineInput.pl.
 Files created in build directory, all but last created by createPipelineInput.pl:
 * '''PeptideAtlasInput_concat.PAidentlist'''
-* '''PeptideAtlasInput_sorted.PAidentlist'''<br>These two files are identical except for the sorting of the lines, and have the following fields:
+* '''PeptideAtlasInput_sorted.PAidentlist'''<br>These two files are identical except for the sorting of the lines. They are in tsv format and have the following fields:
 # search batch ID
 # spectrum query
 * '''APD_Sc_all.PAxml'''
 * '''APD_Sc_all.fasta''' -- fasta format file of all peptides in our atlas; PeptideAtlas accessions used. (Created in pipeline script after call to createPipelineInput.pl)
+Files created in the directory for each experiment:
+* '''interact-prob.pep.PAidentlist-template''' -- first 11 fields of PAidentlist files above
+* '''interact-prob.pep.PAidentlist''' -- same format as PAidentlist files above
 ====Download latest fasta files from web for reference DB (also called biosequence set)====