Windows Installation Guide
From SPCTools
| Revision as of 20:51, 5 July 2013 JoeS (Talk | contribs) (→Next install the MSVC/.Net Frameworks) ← Previous diff |
Revision as of 23:12, 24 March 2014 JoeS (Talk | contribs) (→First install ActivePerl) Next diff → |
||
| Line 7: | Line 7: | ||
| ===First install ActivePerl=== | ===First install ActivePerl=== | ||
| - | Install the most current version of ActivePerl (we had some issues with 5.9 at some point, but more recent versions seem to work just fine.) | ||
| - | (The instructions below are accurate as of June 13, 2011. Details will change if ActivePerl modifies its website.) | + | Install the most current version of ActivePerl. If you happen to already have ActivePerl installed any versions older than 5.9 should work but are not regularly tested. Our recommendation however is to upgrade to the latest. |
| - | Go to [http://www.activestate.com/Products/activeperl www.activestate.com/Products/activeperl/downloads] to download the "Community Edition". | + | Go to [http://www.activestate.com/activeperl/downloads www.activestate.com/activeperl/downloads] to download the "Community Edition". On the right side of the page select either the x86 or 64 bit version and save the download to your desktop. Double-click to install. |
| - | Scroll down to the section for ActivePerl 5.12.3.1204 MSI. Select x86 or 64-bit as appropriate and click "Windows Installer (MSI)" | + | ''(The instructions above are accurate as of March, 2014. Details can change if ActivePerl modifies its website.)'' |
| - | + | ||
| - | Save to desktop. Double-click to install. | + | |
| ===Next install the MSVC/.Net Frameworks=== | ===Next install the MSVC/.Net Frameworks=== | ||
Revision as of 23:12, 24 March 2014
Intalling the Windows version of the TPP is fairly straightforward. Detailed instructions with lots of screenshots appear below. However, the following brief instructions may be sufficient:
- Make sure that you have rights to install software on your computer (i.e. Admin privileges)
- Install the latest version of ActivePerl (some versions will not work)
- Download the latest TPP here and install
Here are the detailed instructions. The screenshots are large; don't miss the instructions interspersed between them:
First install ActivePerl
Install the most current version of ActivePerl. If you happen to already have ActivePerl installed any versions older than 5.9 should work but are not regularly tested. Our recommendation however is to upgrade to the latest.
Go to www.activestate.com/activeperl/downloads to download the "Community Edition". On the right side of the page select either the x86 or 64 bit version and save the download to your desktop. Double-click to install.
(The instructions above are accurate as of March, 2014. Details can change if ActivePerl modifies its website.)
Next install the MSVC/.Net Frameworks
In order to use ProteoWizard's msconvert program (bundled with TPP) you'll need to also have installed the MSVC 2008/2010 SP1 (x86), and the .NET Framework 3.5/4.0 SP1 software packages Microsoft.
- Download and install MSVC 2008 SP1 (x86)
- Download and install MSVC 2010 SP1 (x86)
- Download and install .NET Framework 3.5 SP1
- Download and install .Net Framework 4.0
Now install TPP
(If you are not currently reading this from the spctools.org website: go to www.spctools.org/wiki, click on TPP in left nav bar, and click Windows Installation.)
Download the TPP from its page at the Sourceforge website
Click "Trans-Proteomic Pipeline (TPP)"
Click "TPP v4.6 (occupy) rev 3"
Select .exe file and save to desktop
Double-click resulting icon, then select "run"
License Agreement - agree
Installation typically takes less than a minute
You will see a welcome install popup -- read and click OK. You will see another popup asking to install and configure a webserver on your computer. This is necessary. If you agree, click OK. Finally you will see an "installation complete" popup -- choose whether to reboot now or later.
