TPP:Developer Documentation

From SPCTools

Revision as of 22:33, 25 August 2006 Jtasman (Talk | contribs) (→usage 5: options for static html output) ← Previous diff		Current revision Jwinget (Talk | contribs) (→PeptideProphetParser)
Line 1:		Line 1:
-	This page will contain a tutorial for the TPP geared towards a code developer.	+	==License==
-		+	All of the TPP is released under the LGPL license. Some other programs (converters) have different licences.
-	It should contain the minimum necessary mass spec and proteomics info necessary to get someone new to the field started.	+
Line 9:		Line 8:
-	==version control==	+	==Version control==
-	repository: sourceforge, project "sashimi"	+
-	cvs access:	+	This project is hosted at sourceforge ([http://www.sourceforge.net]) under the "sashimi" project, using SVN.
-	==XML Parsing libraries==
-	===perl===	+	===SVN access===
-	* xml tree	+
-	===c++===	+	====Anonymous access====
-	* A. Keller's "tag" system	+	Anyone can check out the code: ...
-	* J. Tasman code	+
		+	====Developer access====
		+	You'll need to be a project developer: register at SourceForge and contact one of the main Sashimi developers.
-	==Overview(from Readme)==	+	see [https://sourceforge.net/svn/?group_id=69281 our SourceForge SVN info page.]
-	Trans-Proteomic Pipeline (TPP)	+
-	Andrew Keller, ISB	+	==XML Parsing libraries==
-	08.11.04	+	===perl===
		+	* xml tree
		+	===c++===
		+	* A. Keller's "tag" system:
		+	All Parser programs (children of Parser.cxx) parse pepXML and protXML with the constrain that all text be enclosed within a 'tag' such as the following example:
		+	<pre><mytag name="akeller"><email address="akeller@systemsbiology.org/></mytag></pre>
-	===System Requirements===	+	NOT ACCEPTABLE are files with text outside of a bracket tag enclosure, such as 'akeller' in the following illegal example:
		+	<pre><illegaltag>akeller</illegaltag></pre>
		+
		+	* J. Tasman code
-	====Webserver====
-	Webserver with access to data directories. See configuration section below. IIS on windows is the most supported configuration. Apache support is in the works.	+	==System Requirements==
		+	===Webserver===
		+	Webserver with access to data directories. See configuration section below. Apache support is the default configuration and is installed and configured on port 1441 automatically as part of the current cygwin installation. '''IIS on windows is no longer a supported configuration.'''
	===XSLT Processor===		===XSLT Processor===
Line 52:		Line 57:
	cases, bypass XSLT altogether.		cases, bypass XSLT altogether.
-	===Required libraries===	+	===Libraries===
-	Library requirements: expat-2.0.0 (copied to cvs), boost 1.32, xerces (version?)	+	*expat-2.0.0 (copied to svn tree)
		+	*boost 1.32
		+	*xerces (version?)
	You will need to install the following C libraries. These libraries are very common on linux distributions. Make		You will need to install the following C libraries. These libraries are very common on linux distributions. Make
	sure that you do not already have them before trying to install. If you do need to install, first try to use the standard package system (e.g. RPMs for Fedora linux , cygwin installer for cygwin-- see below, etc.) If you cannot install them via the normal package system for your distribution, go to their website and download directly.		sure that you do not already have them before trying to install. If you do need to install, first try to use the standard package system (e.g. RPMs for Fedora linux , cygwin installer for cygwin-- see below, etc.) If you cannot install them via the normal package system for your distribution, go to their website and download directly.
-	libgd www.boutell.com/gd	+
-	libpng www.libpng.org	+	*libgd www.boutell.com/gd
-	zlib www.gzip.org/zlib	+	*libpng www.libpng.org
		+	*zlib www.gzip.org/zlib
	Windows users should get this by using the Cygwin installer (www.cygwin.com). <b>Make sure to get the devel packages</b>, in order to have the required .h files.		Windows users should get this by using the Cygwin installer (www.cygwin.com). <b>Make sure to get the devel packages</b>, in order to have the required .h files.
		+	==Building from source==
	===Configuration===		===Configuration===
-	====Building from source====	+	On [[TPP:Documentation]] you can see other guides for building on specific systems.
-	<b>Linux only</b> Skip ahead to Compilation for a Cygwin build. Note that we distribute precompiled binaries in a complete custom cygwin installation.	+	Skip ahead to Compilation for a Cygwin build, the following is for ''Linux only''. Note that we distribute precompiled binaries in a complete custom cygwin installation.
		+	====Edit the src/Makefile.incl file====
-	=====Edit src/Makefile.incl file=====	+	Set the TPP_ROOT variable to the directory where you want to install the TPP. '''Include the trailing '/' when setting the path''', e.g.:
-		+
-	#Set the TPP_ROOT variable to the directory where you want to install the TPP,	+
-	include the trailing '/' when setting the path, e.g.	+
	TPP_ROOT=/usr/local/tpp/		TPP_ROOT=/usr/local/tpp/
-	#Set the TPP_WEB variable to the webserver root relative alias to the TPP, include the trailing '/' when setting the path, e.g.	+	Set the TPP_WEB variable to the webserver root relative alias to the TPP. '''Include the trailing '/' when setting the path''', e.g.:
	TPP_WEB=/tpp/		TPP_WEB=/tpp/
-	WARNING: To avoid problems during the installation you MUST include the trailing '/'	+
-	when setting the above two paths	+	WARNING: To avoid problems during the installation ''''you MUST include the trailing '/' when setting the above two paths''''.
		+
	#Set the XSLT_PROC to the path of the xsltproc executable on your system		#Set the XSLT_PROC to the path of the xsltproc executable on your system
	XSLT_PROC=/usr/bin/xsltproc		XSLT_PROC=/usr/bin/xsltproc
-	In the src directory: type 'make configure' (once again, DON'T DO THIS for Windows/Cygwin!!!)	+	In the src directory, type 'make configure' (once again, DON'T DO THIS for Windows/Cygwin!!!)
-	===Compilation from source===	+	===Compilation===
-	====Linux====	+	====Linux====
	In the src directory: type 'make all' to compile binaries		In the src directory: type 'make all' to compile binaries
Line 100:		Line 108:
	The TPP will be installed in the following directory structure by default:		The TPP will be installed in the following directory structure by default:
-	/usr/local/tpp TPP root directory	+	;/usr/local/tpp : TPP root directory
-	/usr/local/tpp/cgi-bin CGI-BIN for tpp, contains all web served executables	+	;/usr/local/tpp/cgi-bin : CGI-BIN for tpp, contains all web served executables
-	/usr/local/tpp/bin binary directory	+	;/usr/local/tpp/bin : binary directory
-	/usr/local/tpp/html contains all non-executable web served objects	+	;/usr/local/tpp/html : contains all non-executable web served objects
-	/usr/local/tpp/etc contains miscelaneous configuration files	+	;/usr/local/tpp/etc : contains miscelaneous configuration files
-	/usr/local/tpp/schema contains all XML schema files	+	;/usr/local/tpp/schema: contains all XML schema files
	====Windows/Cygwin====		====Windows/Cygwin====
Line 113:		Line 121:
-	===Webserver Configuration===	+	==Webserver Configuration==
	Ideally, all data directories should be cross mounted under the webserver root. Webserver should have SSI (server side includes) turned on. If it is not already, you can activate the Web Server SSI (Server Side Includes)		Ideally, all data directories should be cross mounted under the webserver root. Webserver should have SSI (server side includes) turned on. If it is not already, you can activate the Web Server SSI (Server Side Includes)
-	====Activating SSI on Linux====	+	===Activating SSI on Linux===
	Modify the /etc/httpd.conf file:		Modify the /etc/httpd.conf file:
Line 128:		Line 136:
-	====Webserver Root====	+	===Webserver Root===
	The environment variable WEBSERVER_ROOT must be set for the program user(s) as well as the webserver. The WEBSERVER_ROOT		The environment variable WEBSERVER_ROOT must be set for the program user(s) as well as the webserver. The WEBSERVER_ROOT
-	should point to the webserver's document root directory (e.g. /home/httpd/html on linux, or ??? on windows ).	+	should point to the webserver's document root directory (e.g. /home/httpd/html on linux/apache, or ??? on windows/IIS ).
-		+	===Apache specific webserver configuration===
-		+
-	====Apache specific webserver configuration====	+
	Configure the webserver:		Configure the webserver:
Line 173:		Line 179:
	</Directory>		</Directory>
-	====Windows/Cygwin IIS-specific configuration====	+	===Windows/Cygwin Apache-specific configuration===
	Configure as described in "Post-Install Configuration" on the following page:		Configure as described in "Post-Install Configuration" on the following page:
	[http://tools.proteomecenter.org/configure.html]		[http://tools.proteomecenter.org/configure.html]
-	===Running the TPP===	+	Apache is installed and configured automatically as part of the Cygwin install.
		+
		+	==XML File Validation==
		+	The SAX Validator will use the schema location indicated in the XML file to validate:
		+	SAX2Count -v=always myfile.xml
		+
		+
		+	==Running the TPP==
		+
		+	===Overview===
	Specific instructions are geared towards command-line usage. Note that the web-base GUI is a very convenient way to do these steps.		Specific instructions are geared towards command-line usage. Note that the web-base GUI is a very convenient way to do these steps.
Line 186:		Line 201:
	====Assigning peptide sequences to spectra (using a search engine)====		====Assigning peptide sequences to spectra (using a search engine)====
-	====Converting search results to pepXML format====	+	====Converting search engine results to pepXML format====
-	You need to start with a converter to write out search results as 'summary.xml' in pepXML format.	+	Analysis programs begin with a pepXML-format file called 'summary.xml', containing the peptides identified by the search engine.
		+
	*For SEQUEST results, you must specify the sequest.params file used for the search:		*For SEQUEST results, you must specify the sequest.params file used for the search:
Line 231:		Line 247:
	Questions? Search the newsgroup first, then post questions.		Questions? Search the newsgroup first, then post questions.
-	==XML File Validation==	+	===Converters to mzXML===
-	The SAX Validator will use the schema location indicated in the XML file to validate:	+
-	SAX2Count -v=always myfile.xml	+
-		+
-		+
-	==Program Usage==	+
	===Converters to pepXML===		===Converters to pepXML===
Line 243:		Line 254:
	====Sequest2XML====		====Sequest2XML====
		+
		+	'''retired in favor of Out2XML'''
		+
	Sequest2XML summary.html (-P/full/path/mysequest.params) (-M) (-m) (-a) (-pI) (-Eenzyme)		Sequest2XML summary.html (-P/full/path/mysequest.params) (-M) (-m) (-a) (-pI) (-Eenzyme)
	Converts summary.html to summary.xml in pepXML format. Uses sequest.params file in current directory, unless specified as second argument		Converts summary.html to summary.xml in pepXML format. Uses sequest.params file in current directory, unless specified as second argument
Line 296:		Line 310:
	;MINPROB=xx: filter away results with a probability less than xx		;MINPROB=xx: filter away results with a probability less than xx
	;EXTRAITRS=xx: specify additional EM iterations		;EXTRAITRS=xx: specify additional EM iterations
		+	;NONTT: Do not use NTT information
		+	;CLEVEL=xx: Specify Conservative Level
	====XPressPeptideParser====		====XPressPeptideParser====
Line 367:		Line 383:
	====xinteract====		====xinteract====
-	xinteract	+	xinteract (generaloptions) (-Oprophetoptions) (-Xxpressoptions) (-Aasapoptions) (-L<conditionfile>libraoptions) xmlfile1 xmlfile2 ....
-	<pre>	+
-	usage: xinteract (generaloptions) (-Oprophetoptions) (-Xxpressoptions) (-Aasapoptions) (-L<conditionfile>libraoptions) xmlfile1 xmlfile2 ....	+
-	generaloptions:	+	=====options=====
-	-Nmyfile.xml [write output to file 'myfile.xml']	+
-	-nI [do not run Interact (convert to pepXML only)]	+
-	-nP [do not run PeptideProphet]	+
-	-nR [do not run get all proteins corresponding to degenerate peptides from database]	+
-	-p0 [do not discard search results with PeptideProphet probabilities below 0.05]	+
-	-x<num> [number of extra PeptideProphet interations; default <num>=0]	+
-	-p<num> [filter results below PeptideProphet probability <num>; default <num>=0.05]	+
-	-mw [calculate protein molecular weights]	+
-	-MONO [calculate monoisotopic peptide masses during conversion to pepXML]	+
-	-AVE [calculate average peptide masses during conversion to pepXML]	+
-	-eX [specify sample enzyme other than trypsin]	+
-	-eC [specify sample enzyme = Chymotrypsin]	+
-	-eA [specify sample enzyme = AspN]	+
-	-eG [specify sample enzyme = GluC]	+
-	-eB [specify sample enzyme = GluC Bicarb]	+
-	-eM [specify sample enzyme = CNBr]	+
-	-eD [specify sample enzyme = Trypsin/CNBr]	+
-	-e3 [specify sample enzyme = Chymotrypsin/AspN/Trypsin]	+
-	-eE [specify sample enzyme = Elastase]	+
-	-eL [specify sample enzyme = LysN (cuts before K)]	+
-	-eP [specify sample enzyme = LysN Promisc (cuts before KASR)]	+
-	-eN [specify sample enzyme = Nonspecific or None]	+
-	For developers:	+	;generaloptions
-	-t [run regression test against a previously derived result]	+	;-Nmyfile.xml : write output to file 'myfile.xml'
-	-t! [learn results for regression test]	+	;-nI : do not run Interact (convert to pepXML only)
		+	;-nP : do not run PeptideProphet
		+	;-nR : do not run get all proteins corresponding to degenerate peptides from database
		+	;-p0 : do not discard search results with PeptideProphet probabilities below 0.05
		+	;-x<num> : number of extra PeptideProphet interations; default <num>=0
		+	;-p<num> :filter results below PeptideProphet probability <num>; default <num>=0.05
		+	;-mw : calculate protein molecular weights
		+	;-MONO : calculate monoisotopic peptide masses during conversion to pepXML
		+	;-AVE : calculate average peptide masses during conversion to pepXML
		+	;-eX : specify sample enzyme other than trypsin
		+	:; -eC : specify sample enzyme = Chymotrypsin
		+	:; -eA : specify sample enzyme = AspN
		+	:;-eG : specify sample enzyme = GluC
		+	:;-eB : specify sample enzyme = GluC Bicarb
		+	:;-eM : specify sample enzyme = CNBr
		+	:;-eD : specify sample enzyme = Trypsin/CNBr
		+	:;-e3 : specify sample enzyme = Chymotrypsin/AspN/Trypsin
		+	:;-eE : specify sample enzyme = Elastase
		+	:;-eL : specify sample enzyme = LysN (cuts before K)
		+	:;-eP : specify sample enzyme = LysN Promisc (cuts before KASR)
		+	:;-eN : specify sample enzyme = Nonspecific or None
-	prophetoptions [following the 'O']:	+	For developers:
-	i [use icat information in PeptideProphet]	+	;-t : run regression test against a previously derived result
-	f [do not use icat information in PeptideProphet]	+	;-t! : learn results for regression test
-	g [use N-glyc motif information in PeptideProphet]	+
-	m [maldi data]	+
-	I [use pI information in PeptideProphet]	+
-	A [use accurate mass binning in PeptideProphet]	+
-	w [warning instead of exit with error if instrument types between runs is different]	+
-	x [exclude all entries with asterisked score values in PeptideProphet]	+
-	l [leave alone all entries with asterisked score values in PeptideProphet]	+
-	p [run ProteinProphet afterwards]	+	----
-	u [do not assemble protein groups in ProteinProphet analysis]	+	;prophetoptions (following the 'O')
-	s [do not use Occam's Razor in ProteinProphet analysis to	+	;i : use icat information in PeptideProphet
-	derive the simplest protein list to explain observed peptides]	+	;f : do not use icat information in PeptideProphet
		+	;g : use N-glyc motif information in PeptideProphet
		+	;m : maldi data
		+	;I : use pI information in PeptideProphet
		+	;A : use accurate mass binning in PeptideProphet
		+	;w : warning instead of exit with error if instrument types between runs is different
		+	;x : exclude all entries with asterisked score values in PeptideProphet
		+	;l : leave alone all entries with asterisked score values in PeptideProphet
-	xpressoptions [will run XPRESS analysis with any specified options that follow the 'X']:	+	;p : run ProteinProphet afterwards
-	-m<num> change XPRESS mass tolerance (default=1.0)	+	;u : do not assemble protein groups in ProteinProphet analysis
-	-l<str> change labeled residues (default='C')	+	;s :do not use Occam's Razor in ProteinProphet analysis to derive the simplest protein list to explain observed peptides
-	-n<str>,<num> change XPRESS residue mass difference for <str> to <num> (default=9.0)	+
-	-b heavy labeled peptide elutes before light labeled partner	+
-	-L for ratio, set/fix light to 1, vary heavy	+
-	-H for ratio, set/fix heavy to 1, vary light	+
-	asapoptions [will run ASAPRatio analysis with any specified options that follow the 'A']:	+	----
-	-l<str> change labeled residues (default='C')	+	;xpressoptions (will run XPRESS analysis with any specified options that follow the 'X')
-	-b heavy labeled peptide elutes before light labeled partner	+	;-m<num> : change XPRESS mass tolerance (default=1.0)
-	-f<num> areaFlag set to num (ratio display option)	+	;-l<str> : change labeled residues (default='C')
-	-S static modification quantification (i.e. each run is either	+	;-n<str>,<num> : change XPRESS residue mass difference for <str> to <num> (default=9.0)
-	all light or all heavy)	+	;-b : heavy labeled peptide elutes before light labeled partner
-	-F use fixed scan range for light and heavy	+	;-L : for ratio, set/fix light to 1, vary heavy
-	-C quantitate only the charge state where the CID was made	+	;-H : for ratio, set/fix heavy to 1, vary light
-	-m<str> specified label masses (e.g. M74.325Y125.864), only relevant for	+
-	static modification quantification	+
-	libraoptions [will run Libra Quantitation analysis with any specified options that follow the 'L']:	+	----
-	-<num> normalization channel (for protein level quantitation)	+	;asapoptions (will run ASAPRatio analysis with any specified options that follow the 'A')
		+	;-l<str> : change labeled residues (default='C')
		+	;-b : heavy labeled peptide elutes before light labeled partner
		+	;-f<num> : areaFlag set to num (ratio display option)
		+	;-S : static modification quantification (i.e. each run is either all light or all heavy)
		+	;-F : use fixed scan range for light and heavy
		+	;-C : quantitate only the charge state where the CID was made
		+	;-m<str> : specified label masses (e.g. M74.325Y125.864), only relevant for static modification quantification
-	examples:	+	----
-	xinteract *.xml [combines together data in all pepXML files into 'interact.xml', then runs PeptideProphet]	+	;libraoptions (will run Libra Quantitation analysis with any specified options that follow the 'L')
-	xinteract -Ndata.xml *.xml [same as above, but results are written to 'data.xml']	+	;-<num> : normalization channel (for protein level quantitation)
-	xinteract -Ndata.xml -X -Op *.xml [same as above, but run XPRESS analysis in its default mode, then	+
-	ProteinProphet]	+
-	xinteract -X -A file1.xml file2.xml [combines together data in file1.xml and file2.xml into 'interact.xml'	+
-	and then runs XPRESS (in its default mode) and ASAPRatio (in its default mode)]	+
-	xinteract -X-nC,6.0 -A file1.xml file2.xml [same as above, but specifies that cysteine label has a heavy/light	+
-	mass difference of 6.0]	+
-	xinteract -X -A-lDE-S file1.xml file2.xml [sampe as above, but specifies for ASAP to run in static mode	+
-	with labeled residues D and E]	+
-	xinteract -Lmyconditionfile.xml-1 -Op file1.xml file2.xml [run libra quantitiation after PeptideProphet using myconditionfile.xml, and after ProteinProphet normalizing ratios to channel 1 values	+
-	</pre>	+
		+	----
		+	=====examples=====
		+	;xinteract *.xml
		+	:combines together data in all pepXML files into 'interact.xml', then runs PeptideProphet]
		+	;xinteract -Ndata.xml *.xml
		+	:same as above, but results are written to 'data.xml'
		+
		+	;xinteract -Ndata.xml -X -Op *.xml
		+	:same as above, but run XPRESS analysis in its default mode, then ProteinProphet
		+
		+	;xinteract -X -A file1.xml file2.xml
		+	:combines together data in file1.xml and file2.xml into 'interact.xml' and then runs XPRESS (in its default mode) and ASAPRatio (in its default mode)
		+
		+	;xinteract -X-nC,6.0 -A file1.xml file2.xml
		+	:same as above, but specifies that cysteine label has a heavy/light mass difference of 6.0
		+
		+	;xinteract -X -A-lDE-S file1.xml file2.xml
		+	:same as above, but specifies for ASAP to run in static mode with labeled residues D and E
		+
		+	;xinteract -Lmyconditionfile.xml-1 -Op file1.xml file2.xml
		+	:run libra quantitiation after PeptideProphet using myconditionfile.xml, and after ProteinProphet normalizing ratios to channel 1 values
	====runpropet====		====runpropet====
-	Runs ProteinProphet on designated 'interact.xml' file(s)	+	Runs ProteinProphet on designated 'interact.xml' file(s), where interact.xml is a pepXML-formated output file from PeptideProphet.
		+
		+	=====usage 1: specify input file and options=====
		+	runprophet -Ooptions <interact file (with probs)>
		+
		+	runs analysis on inputfile with specified options and writes analysis to inputfile-prot.htm
		+
		+	;options:
		+	;i: icat data (color Cysteines)
		+	;g: N-glycosylation data (color NXS/T)
		+	;m: multifiles (more than one interact.xml file, must specify outfile
		+	;d: delude (do not look up ALL prots corresponding to degenerate peps)
		+	;l: use html input files (pre-TPP)
		+	;X: import XPRESS protein ratios
		+	;A: import ASAPRatio protein ratios and pvalues
		+	;L<num>: import Libra protein ratios normalized to channel <num>
		+	;a: import ASAPRatio results present in file (starting from scratch)
		+	;r: update changes made to ASAPRatio results (previously run using 'a' option)
		+	;n: don't use occam's razor for degenerate peps (get max prot list, including many false positives)
		+	;u: do not assemble PROTEIN GROUPS
		+	;z: do not include zero probability protein entries in output
		+	;H: writes results to static html file (and tab delimited excel file)
		+	;P: includes peptides in tab delimited excel file (must accompany 'H')
		+	;xx: includes results in tab delimited excel file with minimum probability xx, where xx is a number between 0 and 1 (must accompany 'H')
-	=====How to use runprophet=====	+	;examples:
		+	;runprophet -OiXA interact.xml
		+	:for icat data with mzXML XPRESS and ASAPRatio quantitation information
-	======usage 1: specify input file and options======	+	;runprophet -Oia interact.xml
-	<pre>	+	:for icat data with non-mzXML ASAPRAtio information
-	runprophet -Ooptions <interact file (with probs)>	+
-	runs analysis on inputfile with specified options,	+	;runprophet -Oi interact.xml
-	writes analysis to inputfile-prot.htm	+	:for icat data
-	options:	+
-	i: icat data (color Cysteines)	+
-	g: N-glycosylation data (color NXS/T)	+
-	m: multifiles (more than one interact.xml file, must specify outfile	+
-	d: delude (do not look up ALL prots	+
-	corresponding to degenerate peps)	+
-	l: use html input files (pre-TPP)	+
-	X: import XPRESS protein ratios	+
-	A: import ASAPRatio protein ratios and pvalues	+
-	L<num>: import Libra protein ratios normalized to channel <num>	+
-	a: import ASAPRatio results present in file	+
-	(starting from scratch)	+
-	r: update changes made to ASAPRatio results	+
-	(previously run using 'a' option)	+
-	n: don't use occam's razor for degenerate peps	+
-	(get max prot list, including many false positives)	+
-	u: do not assemble PROTEIN GROUPS	+
-	z: do not include zero probability protein entries in output	+
-	H: writes results to static html file (and tab delimited excel file)	+
-	P: includes peptides in tab delimited excel file (must accompany 'H')	+
-	xx: includes results in tab delimited excel file with minimum	+
-	probability xx, where xx is a number between 0 and 1 (must accompany 'H')	+
-	example: runprophet -OiXA interact.xml	+	;runprophet -Og interact.xml
-	(for icat data with mzXML XPRESS and ASAPRatio quantitation information)	+	:for N-glycosylated data
-	example: runprophet -Oia interact.xml	+
-	(for icat data with non-mzXML ASAPRAtio information)	+
-	example: runprophet -Oi interact.xml	+
-	(for icat data)	+
-	example: runprophet -Og interact.xml	+
-	(for N-glycosylated data)	+
-	example: runprophet -OL interact.htm	+
-	(for pre-TPP html input file)	+
-	</pre>	+
		+	;runprophet -OL interact.htm
		+	:for pre-TPP html input file
-	======usage 2: specify input file and use default options======	+	=====usage 2: specify input file and use default options=====
-	<pre>	+	runprophet <interact file (with probs)>
-	runprophet <interact file (with probs)>	+	runs analysis on inputfile using default options and writes analysis to inputfile-prot.htm
-	runs analysis on inputfile using default options,	+	;example:
-	writes analysis to inputfile-prot.htm	+	;runprophet interact.xml
		+	:writes output to file: interact-prot.shtml
-	example: runprophet interact.xml	+	=====usage 3: specify output file=====
-	(writes output to file: interact-prot.shtml)	+	runprophet (-Ooptions) <interact file (with probs)> <outputfile>
-	</pre>	+	runs analysis on inputfile (with specified options) and writes analysis to specified outputfile
-	======usage 3: specify output file======	+	;example:
-	<pre>	+
-	runprophet (-Ooptions) <interact file (with probs)> <outputfile>	+
-	runs analysis on inputfile (with specified options),	+	;runprophet interact.xml protein.shtml
-	writes analysis to specified outputfile	+	:writes output to file: protein.shtml
-	example: runprophet interact.xml protein.shtml	+	=====usage 4: combine multiple datasets into a single analysis=====
-	(writes output to file: protein.shtml)	+
-	</pre>	+
-	======usage 4: combine multiple datasets into a single analysis======	+	runprophet -Om(options) <interactfile1 interactfile2 ...> <outputfile>
-	<pre>	+	runs analysis on multiple inputfiles (with specified options) and writes analysis to specified outputfile
-	runprophet -Om(options) <interactfile1 interactfile2 ...> <outputfile>	+
-	runs analysis on multiple inputfiles (with specified options),	+	;example: runprophet -Oim interact-1.xml interact-2.xml protein.shtml
-	writes analysis to specified outputfile	+
-	example: runprophet -Oim interact-1.xml interact-2.xml protein.shtml	+	;analyzes interact-1.xml and interact-2.xml icat data together and writes output to file: protein.shtml
-	(analyzes interact-1.xml and interact-2.xml icat data	+
-	together and writes output to file: protein.shtml)	+
-	</pre>	+
-	======usage 5: options for static html output======	+	=====usage 5: options for static html output=====
-	<pre>	+	;example: runprophet -OHP0.9 interact.xml
-	example: runprophet -OHP0.9 interact.xml	+	:writes results to static html file, and results with min prob 0.9 (including peptides) to tab delimited excel file
-	writes results to static html file, and results with min prob 0.9	+
-	(including peptides) to tab delimited excel file	+
-	</pre>	+	==Author==
		+	Much of this text comes from the TPP README file, originally written by A. Keller, 2004.
		+	Wiki version created by J. Tasman.
-	CREDITS:	+	==Credits==
	The refreshparser program uses the SPARE Parts by Bruce W. Watson / Loek Cleophas.		The refreshparser program uses the SPARE Parts by Bruce W. Watson / Loek Cleophas.

---

Current revision

Contents 1 License 2 Languages 3 Version control 3.1 SVN access 3.1.1 Anonymous access 3.1.2 Developer access 4 XML Parsing libraries 4.1 perl 4.2 c++ 5 System Requirements 5.1 Webserver 5.2 XSLT Processor 5.3 Libraries 6 Building from source 6.1 Configuration 6.1.1 Edit the src/Makefile.incl file 6.2 Compilation 6.2.1 Linux 6.2.2 Windows/Cygwin 6.3 Installation 6.3.1 Linux 6.3.2 Windows/Cygwin 7 Webserver Configuration 7.1 Activating SSI on Linux 7.2 Webserver Root 7.3 Apache specific webserver configuration 7.4 Windows/Cygwin Apache-specific configuration 8 XML File Validation 9 Running the TPP 9.1 Overview 9.1.1 Conversion of raw spectroscopy data to mzXML format 9.1.2 Assigning peptide sequences to spectra (using a search engine) 9.1.3 Converting search engine results to pepXML format 9.1.4 Processing peptide data with the pipeline (using xinteract) 9.1.5 Example 9.2 Converters to mzXML 9.3 Converters to pepXML 9.3.1 Sequest2XML 9.3.2 Mascot2XML 9.3.3 Comet2XML 9.4 Peptide-level analyses 9.4.1 InteractParser 9.4.2 DatabaseParser 9.4.3 RefreshParser 9.4.4 EnzymeDigestionParser 9.4.5 PeptideProphetParser 9.4.6 XPressPeptideParser 9.4.7 ASAPRatioPeptideParser 9.4.8 LibraPeptideParser 9.4.9 CompactParser 9.5 Protein-level analyses 9.5.1 ProteinProphet.pl 9.5.2 XPressProteinRatioParser 9.5.3 ASAPRatioProteinRatioParser 9.5.4 LibraProteinRatioParser 9.6 Wrappers 9.6.1 xinteract 9.6.1.1 options 9.6.1.2 examples 9.6.2 runpropet 9.6.2.1 usage 1: specify input file and options 9.6.2.2 usage 2: specify input file and use default options 9.6.2.3 usage 3: specify output file 9.6.2.4 usage 4: combine multiple datasets into a single analysis 9.6.2.5 usage 5: options for static html output 10 Author 11 Credits

License

All of the TPP is released under the LGPL license. Some other programs (converters) have different licences.

Languages

C, C++, perl

Version control

This project is hosted at sourceforge ([1]) under the "sashimi" project, using SVN.

SVN access

Anonymous access

Anyone can check out the code: ...

Developer access

You'll need to be a project developer: register at SourceForge and contact one of the main Sashimi developers.

 see our SourceForge SVN info page.

XML Parsing libraries

perl

• xml tree

c++

• A. Keller's "tag" system:

All Parser programs (children of Parser.cxx) parse pepXML and protXML with the constrain that all text be enclosed within a 'tag' such as the following example:

<mytag name="akeller"><email address="akeller@systemsbiology.org/></mytag>

NOT ACCEPTABLE are files with text outside of a bracket tag enclosure, such as 'akeller' in the following illegal example:

<illegaltag>akeller</illegaltag>

• J. Tasman code

System Requirements

Webserver

Webserver with access to data directories. See configuration section below. Apache support is the default configuration and is installed and configured on port 1441 automatically as part of the current cygwin installation. IIS on windows is no longer a supported configuration.

XSLT Processor

The TPP currently relies on an "xsl transform" processor for manipulating XML data.

1. One such program, xsltproc, is usually distributed with Linux so you most likely already have it. It should reside in the /usr/bin/ directory. If it is not already on your computer, first try to install it via the standard package system for your distribution, or the cygwin installer for cygwin. Otherwise you can download it for free at: http://xmlsoft.org/XSLT/downloads.html
2. Another freely available XSLT processor, Xalan, will also work fine with ProteinProphet. If you use it, just make sure it is installed in a directory already on the library path, or else set the LD_LIBRARY_PATH variable to include its location on the webserver:

Add LD_LIBRARY_PATH files to /etc/ld.so.conf
Then type: ldconfig -v

The viewing of large xml files is sometimes slow. We are hoping to optimize the stylesheets in the future, and in some cases, bypass XSLT altogether.

Libraries

• expat-2.0.0 (copied to svn tree)
• boost 1.32
• xerces (version?)

You will need to install the following C libraries. These libraries are very common on linux distributions. Make sure that you do not already have them before trying to install. If you do need to install, first try to use the standard package system (e.g. RPMs for Fedora linux , cygwin installer for cygwin-- see below, etc.) If you cannot install them via the normal package system for your distribution, go to their website and download directly.

• libgd www.boutell.com/gd
• libpng www.libpng.org
• zlib www.gzip.org/zlib

Windows users should get this by using the Cygwin installer (www.cygwin.com). Make sure to get the devel packages, in order to have the required .h files.

Building from source

Configuration

On TPP:Documentation you can see other guides for building on specific systems.

Skip ahead to Compilation for a Cygwin build, the following is for Linux only. Note that we distribute precompiled binaries in a complete custom cygwin installation.

Edit the src/Makefile.incl file

Set the TPP_ROOT variable to the directory where you want to install the TPP. Include the trailing '/' when setting the path, e.g.:

TPP_ROOT=/usr/local/tpp/	

Set the TPP_WEB variable to the webserver root relative alias to the TPP. Include the trailing '/' when setting the path, e.g.:

TPP_WEB=/tpp/

WARNING: To avoid problems during the installation 'you MUST include the trailing '/' when setting the above two paths'.

1. Set the XSLT_PROC to the path of the xsltproc executable on your system

XSLT_PROC=/usr/bin/xsltproc

In the src directory, type 'make configure' (once again, DON'T DO THIS for Windows/Cygwin!!!)

Compilation

Linux

In the src directory: type 'make all' to compile binaries

Windows/Cygwin

In the src directory: type 'make windows' to compile binaries

Installation

Linux

In the src directory: type 'make install' to install all the binaries

The TPP will be installed in the following directory structure by default:

/usr/local/tpp

TPP root directory

/usr/local/tpp/cgi-bin

CGI-BIN for tpp, contains all web served executables

/usr/local/tpp/bin 

binary directory

/usr/local/tpp/html 

contains all non-executable web served objects

/usr/local/tpp/etc 

contains miscelaneous configuration files

/usr/local/tpp/schema

contains all XML schema files

Windows/Cygwin

In the src directory: type 'make install-windows' to install all the binaries

Webserver Configuration

Ideally, all data directories should be cross mounted under the webserver root. Webserver should have SSI (server side includes) turned on. If it is not already, you can activate the Web Server SSI (Server Side Includes)

Activating SSI on Linux

Modify the /etc/httpd.conf file:

In the document root <Directory> section, add +Includes to the end of already existing Options line:

 Options +Includes

Uncomment or add in the mod_mime.c section:

AddType text/html .shtml
AddHandler server-parsed  .shtml 

Then restart web server: /etc/rc.d/init.d/httpd restart

Webserver Root

The environment variable WEBSERVER_ROOT must be set for the program user(s) as well as the webserver. The WEBSERVER_ROOT should point to the webserver's document root directory (e.g. /home/httpd/html on linux/apache, or ??? on windows/IIS ).

Apache specific webserver configuration

Configure the webserver:

Add the appropriate web paths to the TPP as described below. If you are using the Apache http server, edit the active 'httpd.conf' file. Add the following Alias and ScriptAlias Directives as described below. Be sure to link to the appropriate tpp-version number.

#
# ISB-Tools Trans Proteomic Pipeline directives
#


Alias /tpp/html "/usr/local/tpp/html"


<Directory "/usr/local/tpp/html">
   AllowOverride None
   Options Includes Indexes FollowSymLinks MultiViews
   Order allow,deny
   Allow from all
</Directory>


<Directory "/usr/local/tpp/schema">
   AllowOverride None
   Options Includes Indexes FollowSymLinks MultiViews
   Order allow,deny
   Allow from all
</Directory>


ScriptAlias /tpp/cgi-bin/ "/usr/local/tpp/cgi-bin/"


<Directory "/usr/local/tpp/cgi-bin">
   AllowOverride AuthConfig Limit
   Options ExecCGI
   Order allow,deny
   Allow from all
   SetEnv WEBSERVER_ROOT /home/httpd/html
</Directory>

Windows/Cygwin Apache-specific configuration

Configure as described in "Post-Install Configuration" on the following page: [2]

Apache is installed and configured automatically as part of the Cygwin install.

XML File Validation

The SAX Validator will use the schema location indicated in the XML file to validate:

SAX2Count -v=always myfile.xml

Running the TPP

Overview

Specific instructions are geared towards command-line usage. Note that the web-base GUI is a very convenient way to do these steps.

Conversion of raw spectroscopy data to mzXML format

Assigning peptide sequences to spectra (using a search engine)

Converting search engine results to pepXML format

Analysis programs begin with a pepXML-format file called 'summary.xml', containing the peptides identified by the search engine.

• For SEQUEST results, you must specify the sequest.params file used for the search:

In directory with summary.html and summary.mzXML (as well as the SEQUEST results .tgz or subdirectory), type:

Sequest2XML summary.html -Psequest.params

• For Mascot results, you must specify the database used for search:

In the directory with summary.dat and summary.mzXML, type:

Mascot2XML summary.dat -D/full/path/database

You can view the search results by opening the 'summary.xml' file in your browser.

Processing peptide data with the pipeline (using xinteract)

Next, you can run xinteract to apply all or some parts of the pipeline. Type 'xinteract' with no arguments for usage instructions. You can also convert and run the pipeline in one step. See xinterct instructions for details.

Example

To run the pipeline manually, starting with file1.xml and file2.xml:

1. Combine together data from 2 files:
2. InteractParser interact.xml file1.xml file2.xml

Peptide Results can be viewed at any point along the analysis by opening the interact.shtml link.

1. Run PeptideProphet

PeptideProphetParser interact.xml

1. Run XPRESS

XPressPeptideParser interact.xml

1. Run ASAPRatio

ASAPRatioPeptideParser interact.xml

1. Go into database to retrieve all proteins corresponding to identified peptides

RefreshParser interact.xml /full/path/database

1. ProteinProphet

ProteinProphet.pl interact.xml interact-prot.shtml XML_INPUT

From this point on, all analysis is on the output from ProteinProphet: interact-prot.xml Protein Results can be viewed at any point along the analysis by opening the interact-prot.shtml link.

1. XPRESS Protein

XPressProteinParser interact-prot.xml

1. ASAPRatio Protein

ASAPRatioProteinRatioParser interact-prot.xml

1. ASAPRatio Pvalue

ASAPRatioPvalueParser interact-prot.xml

Questions? Search the newsgroup first, then post questions.

Converters to mzXML

Converters to pepXML

All converted pepXML files reference a standard sytlesheed pepXML_std.xsl to enable a view of the xml file directly in a browser.

Sequest2XML

retired in favor of Out2XML

Sequest2XML summary.html (-P/full/path/mysequest.params) (-M) (-m) (-a) (-pI) (-Eenzyme)

Converts summary.html to summary.xml in pepXML format. Uses sequest.params file in current directory, unless specified as second argument

OPTIONS

-M 

MALDI mode: do not include spectrum spot number in mzXML file name

-m 

monoisotopic masses (regardless of sequest.params setting)

-a 

average masses (regardless of sequest.params setting)

-pI 

compute peptide pI values

-Eenzyme 

set sample enzyme (default is trypsin, possible values are: nonspecific, chymotrypsin, elastase, gluc, gluc_bicarb, aspn, tca, cnbr, trypsin/cnbr, clostripain, iodosobenzoate, protein_endopeptidase, staph_protease, trypsin_k, trypsin_r)

Mascot2XML

Mascot2XML summary.dat -D/full/path/mydatabase.fasta (-pI) (-Eenzyme) 

Converts summary.dat to summary.xml in pepXML format.

OPTIONS

See Sequest2XML for option definitions

Comet2XML

Comet2XML summary.cmt.tar.gz (-Eenzyme)

OPTIONS

See Sequest2XML for option definitions

Peptide-level analyses

InteractParser

InteractParser interact.xml file1.xml file2.xml file3.xml .....

Merges together pepXML files file1.xml, file2.xml, file3.xml .... into interact.xml. Combines all analysis_summary elements, and reindexes spectrum_query elements. Makes a system call to pepxml2html.pl (pepxml2html.pl -file interact.xml) to create stylesheet for viewing interact.xml amd interact.shtml in a browser.

DatabaseParser

DatabaseParser interact.xml

Prints the database(s) referenced in pepXML document

RefreshParser

RefreshParser interact.xml /full/path/database.fasta

Goes into database to find all proteins corresponding to identified peptides and overwrites results to interact.xml

EnzymeDigestionParser

EnzymeDigestionParser interact.xml (-Eenzyme)

Computes number of tolerable termini and number of missed cleavages in dataset using sample enzyme stored in interact.xml unless specified as argument.

PeptideProphetParser

PeptideProphetParser interact.xml (EXCLUDE) (LEAVE) (ICAT) (NOICAT) (ZERO) (GLYC) (MALDI) (MINPROB=xx)

Runs PeptideProphet with options and overwrites results to interact.xml

OPTIONS

EXCLUDE

exclude delta stars (SEQUEST)

LEAVE

leave delta star values alone (SEQUEST)

ICAT

use peptide icat info in probability calculation

NOICAT

do not use peptide icat info in probability calculation

ZERO

do not discard any data

GLYC

use peptide NXS/T motif info in probability calculation

MALDI

specify maldi spectra

PI

use pI information

ACCMASS

use accurate mass binning

MINPROB=xx

filter away results with a probability less than xx

EXTRAITRS=xx

specify additional EM iterations

NONTT

Do not use NTT information

CLEVEL=xx

Specify Conservative Level

XPressPeptideParser

XPressPeptideParser interact.xml (-b) (-n<str>,<num>) (-n<str>,<num>) (-n<str>,<num>) (-L or -H)

Runs XPRESS with options and overwrites results to interact.xml

OPTIONS

-m<num> 

change XPRESS mass tolerance (default=1.0)

-l<str> 

change labeled residues (default='C')

-r<num> 

change XPRESS residue mass difference (default=9.0)

-n<str>,<num> 

when specifying multiple isotopic labels, use this option e.g. -nK,3.0 -nL,3.0

-r<num> 

change XPRESS residue mass difference (default=9.0)

-b 

heavy labeled peptide elutes before light labeled partner

-L 

for ratio, set/fix light to 1, vary heavy

-H 

for ratio, set/fix heavy to 1, vary light

ASAPRatioPeptideParser

ASAPRatioPeptideParser interact.xml (-b) (-l<str>) (-S) (-m<str>) (-F) (-C)

Runs ASAPRatio with options and overwrites results to interact.xml

OPTIONS

-l<str> 

change labeled residues (default='C')

-b 

heavy labeled peptide elutes before light labeled partner

-f<num> 

areaFlag set to num (ratio display option)

-S 

static modification quantification (i.e. each run is either all light or all heavy)

-F 

use fixed scan range for light and heavy

-C 

quantitate only the charge state where the CID was made

-m<str> 

specified label masses (e.g. M74.325Y125.864), only relevant for static modification quantification

LibraPeptideParser

LibraPeptideParser interact.xml -clibra_condition.xml

Runs LIBRA using channel information specified in libra_condition.xml file and overwrites results to interact.xml

CompactParser

CompactParser file.xml

Compacts either pepXML or protXML, combining together start and end tags when no elements are contained between them

Protein-level analyses

ProteinProphet.pl

ProteinProphet.pl '<interact pep prob html file1><interact pep prob html file2>....' <outfile> (ICAT) (GLYC) (XPRESS) (ASAP_PROPHET) (ACCURACY) (ASAP) (REFRESH) (DELUDE) (NOOCCAM)

OPTIONS

NOOCCAM

non-conservative maximum protein list

ICAT

highlight peptide cysteines

GLYC

highlight peptide N-glycosylation motif

ACCURACY

min pep prob 0

ASAP

compute ASAP ratios for protein entries (ASAP must have been run previously on interact dataset)

REFRESH

import manual changes to ASAP ratios (after initially using ASAP option)

ASAP_PROPHET

*New and Improved* compute ASAP ratios for protein entries (ASAP must have been run previously on all input interact datasets with mz/XML raw data format)

DELUDE

do NOT use peptide degeneracy information when assessing proteins

HTML

write output to static html page (rather than dynamic shtml)

Other options in conjunction with HTML

EXCELPEPS

write output tab delim xls file including all peptides

EXCELxx

write output tab delim xls file including all protein (group)s with minimum probability xx, where xx is a number between 0 and 1

XPressProteinRatioParser

XPressProteinRatioParser interact-prot.xml

Runs XPRESS and overwrites results to interact-prot.xml

ASAPRatioProteinRatioParser

ASAPRatioProteinRatioParser interact-prot.xml

Runs ASAPRatio and overwrites results to interact-prot.xml

LibraProteinRatioParser

interact-prot.xml <normalization_channel>

Runs LIBRA using normalizing ratios to normalization_channel and overwrites results to interact-prot.xml

Wrappers

xinteract

xinteract (generaloptions) (-Oprophetoptions) (-Xxpressoptions) (-Aasapoptions) (-L<conditionfile>libraoptions) xmlfile1 xmlfile2 ....

options

generaloptions

-Nmyfile.xml 

write output to file 'myfile.xml'

-nI 

do not run Interact (convert to pepXML only)

-nP 

do not run PeptideProphet

-nR 

do not run get all proteins corresponding to degenerate peptides from database

-p0 

do not discard search results with PeptideProphet probabilities below 0.05

-x<num> 

number of extra PeptideProphet interations; default <num>=0

-p<num> 

filter results below PeptideProphet probability <num>; default <num>=0.05

-mw 

calculate protein molecular weights

-MONO 

calculate monoisotopic peptide masses during conversion to pepXML

-AVE 

calculate average peptide masses during conversion to pepXML

-eX 

specify sample enzyme other than trypsin

-eC 

specify sample enzyme = Chymotrypsin

-eA 

specify sample enzyme = AspN

-eG 

specify sample enzyme = GluC

-eB 

specify sample enzyme = GluC Bicarb

-eM 

specify sample enzyme = CNBr

-eD 

specify sample enzyme = Trypsin/CNBr

-e3 

specify sample enzyme = Chymotrypsin/AspN/Trypsin

-eE 

specify sample enzyme = Elastase

-eL 

specify sample enzyme = LysN (cuts before K)

-eP 

specify sample enzyme = LysN Promisc (cuts before KASR)

-eN 

specify sample enzyme = Nonspecific or None

For developers:

-t 

run regression test against a previously derived result

-t! 

learn results for regression test

---

prophetoptions (following the 'O')

i 

use icat information in PeptideProphet

f 

do not use icat information in PeptideProphet

g 

use N-glyc motif information in PeptideProphet

m 

maldi data

I 

use pI information in PeptideProphet

A 

use accurate mass binning in PeptideProphet

w 

warning instead of exit with error if instrument types between runs is different

x 

exclude all entries with asterisked score values in PeptideProphet

l 

leave alone all entries with asterisked score values in PeptideProphet

p 

run ProteinProphet afterwards

u 

do not assemble protein groups in ProteinProphet analysis

s 

do not use Occam's Razor in ProteinProphet analysis to derive the simplest protein list to explain observed peptides

---

xpressoptions (will run XPRESS analysis with any specified options that follow the 'X')

-m<num> 

change XPRESS mass tolerance (default=1.0)

-l<str> 

change labeled residues (default='C')

-n<str>,<num> 

change XPRESS residue mass difference for <str> to <num> (default=9.0)

-b 

heavy labeled peptide elutes before light labeled partner

-L 

for ratio, set/fix light to 1, vary heavy

-H 

for ratio, set/fix heavy to 1, vary light

---

asapoptions (will run ASAPRatio analysis with any specified options that follow the 'A')

-l<str>  

change labeled residues (default='C')

-b  

heavy labeled peptide elutes before light labeled partner

-f<num>  

areaFlag set to num (ratio display option)

-S  

static modification quantification (i.e. each run is either all light or all heavy)

-F  

use fixed scan range for light and heavy

-C  

quantitate only the charge state where the CID was made

-m<str>  

specified label masses (e.g. M74.325Y125.864), only relevant for static modification quantification

---

libraoptions (will run Libra Quantitation analysis with any specified options that follow the 'L')

-<num>  

normalization channel (for protein level quantitation)

---

examples

xinteract *.xml

combines together data in all pepXML files into 'interact.xml', then runs PeptideProphet]

xinteract -Ndata.xml *.xml

same as above, but results are written to 'data.xml'

xinteract -Ndata.xml -X -Op *.xml

same as above, but run XPRESS analysis in its default mode, then ProteinProphet

xinteract -X -A file1.xml file2.xml

combines together data in file1.xml and file2.xml into 'interact.xml' and then runs XPRESS (in its default mode) and ASAPRatio (in its default mode)

xinteract -X-nC,6.0 -A file1.xml file2.xml

same as above, but specifies that cysteine label has a heavy/light mass difference of 6.0

xinteract -X -A-lDE-S file1.xml file2.xml

same as above, but specifies for ASAP to run in static mode with labeled residues D and E

xinteract -Lmyconditionfile.xml-1 -Op file1.xml file2.xml

run libra quantitiation after PeptideProphet using myconditionfile.xml, and after ProteinProphet normalizing ratios to channel 1 values

runpropet

Runs ProteinProphet on designated 'interact.xml' file(s), where interact.xml is a pepXML-formated output file from PeptideProphet.

usage 1: specify input file and options

runprophet -Ooptions <interact file (with probs)>

runs analysis on inputfile with specified options and writes analysis to inputfile-prot.htm

options

i

icat data (color Cysteines)

g

N-glycosylation data (color NXS/T)

m

multifiles (more than one interact.xml file, must specify outfile

d

delude (do not look up ALL prots corresponding to degenerate peps)

l

use html input files (pre-TPP)

X

import XPRESS protein ratios

A

import ASAPRatio protein ratios and pvalues

L<num>

import Libra protein ratios normalized to channel <num>

a

import ASAPRatio results present in file (starting from scratch)

r

update changes made to ASAPRatio results (previously run using 'a' option)

n

don't use occam's razor for degenerate peps (get max prot list, including many false positives)

u

do not assemble PROTEIN GROUPS

z

do not include zero probability protein entries in output

H

writes results to static html file (and tab delimited excel file)

P

includes peptides in tab delimited excel file (must accompany 'H')

xx

includes results in tab delimited excel file with minimum probability xx, where xx is a number between 0 and 1 (must accompany 'H')

examples

runprophet -OiXA interact.xml

for icat data with mzXML XPRESS and ASAPRatio quantitation information

runprophet -Oia interact.xml

for icat data with non-mzXML ASAPRAtio information

runprophet -Oi interact.xml

for icat data

runprophet -Og interact.xml

for N-glycosylated data

runprophet -OL interact.htm

for pre-TPP html input file

usage 2: specify input file and use default options

runprophet <interact file (with probs)>

runs analysis on inputfile using default options and writes analysis to inputfile-prot.htm

example

runprophet interact.xml

writes output to file: interact-prot.shtml

usage 3: specify output file

runprophet (-Ooptions) <interact file (with probs)> <outputfile>

runs analysis on inputfile (with specified options) and writes analysis to specified outputfile

example

runprophet interact.xml protein.shtml

writes output to file: protein.shtml

usage 4: combine multiple datasets into a single analysis

runprophet -Om(options) <interactfile1 interactfile2 ...> <outputfile>

runs analysis on multiple inputfiles (with specified options) and writes analysis to specified outputfile

example

runprophet -Oim interact-1.xml interact-2.xml protein.shtml

analyzes interact-1.xml and interact-2.xml icat data together and writes output to file

protein.shtml

usage 5: options for static html output

example

runprophet -OHP0.9 interact.xml

writes results to static html file, and results with min prob 0.9 (including peptides) to tab delimited excel file

Author

Much of this text comes from the TPP README file, originally written by A. Keller, 2004. Wiki version created by J. Tasman.

Credits

The refreshparser program uses the SPARE Parts by Bruce W. Watson / Loek Cleophas.